Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
5. If you want to create an additional wireless network isolated from your LAN, select the
Enable guest network checkbox (available for the Router, and WISP Repeater modes
only).
6. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the access point.
7. If you want to create a password for access to the guest wireless network, deselect the Open
network checkbox and fill in the Password field.
8. If you want to limit the bandwidth of the guest wireless network, select the Enable
shaping checkbox and fill in the Shaping field.
9. Click the NEXT button to continue or click the BACK button to specify other settings.
Figure 38. The page for configuring the wireless network.
Page 46 of 158
Configuring via Web-based Interface
Advertisement
Table of Contents
