Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
Parameter
DNS relay
External DHCP server IP
Option 82 Remote ID
When all needed settings are configured, click the APPLY button.
In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The access
point assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the Dynamic IP Addresses section, the DHCP server value is selected from the
Mode of dynamic IP address assignment drop-down list).
To create a MAC-IPv4 pair, click the ADD button (
field, enter an IPv4 address which will be assigned to the device from the LAN, then in the MAC
address field, enter the MAC address of this device. In the Hostname field, specify a network
name of the device for easier identification (optional). Click the APPLY button.
In order to view MAC addresses of the devices connected to the access point at the moment, click
the CLIENTS LIST button. In the opened window, select the needed device and click the OK
button. To view the latest list of the connected devices, click the REFRESH button.
To edit the settings for the existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the APPLY button.
Move the switch to the right so that the devices connected to the
access point obtain the address of the access point as the DNS server
address.
Move the switch to the left so that the devices connected to the
access point obtain the address transmitted by the ISP or specified
on the Advanced / DNS page as the DNS server address.
The IP address of the external DHCP server which assigns IP
addresses to the access point's clients.
To specify several IP addresses, click the ADD button, and in the
line displayed, enter an IP address.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
The value of the Remote ID field of DHCP option 82 in accordance
with RFC3046.
Do not fill in the field unless your ISP or the administrator of the
external DHCP server provided this value.
Figure 67. The section for creating MAC-IPv4 pairs.
Page 77 of 158
Configuring via Web-based Interface
Description
). In the opened window, in the IP address
Advertisement
Table of Contents
