Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Type
Level
Server
Port
After specifying the needed parameters, click the APPLY button.
To disable logging of the system events, move the Enable switch to the left and click the APPLY
button.
Figure 113. The System / Log page. The Settings tab.
Select a type of logging from the drop-down list.
Local: the system log is stored in the access point's memory.
•
When this value is selected, the Server and Port fields are
not displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Remote and local: the system log is stored in the access
•
point's memory and sent to the remote host specified in the
Server field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the value
514 is specified.
Page 146 of 158
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
