Adjust The Chain Ruler For .404 Chain Grinding - Markusson Combimatic Owner's Manual

Combimatic
5 .5 Adjust the chain ruler for
.404 chain grinding
1 . Loosen the 4 M6 nuts that holds the
outer ruler in place .
2 . Remove the 2 ruler wheels and the four
4 mm distances from the screws that
holds the ruler in place .
3 . Replace the 4 mm distances with the 2,5
mm distances that can be found in the
packing material for the machine .
4 . Mount the outer ruler with the 4 M6 nuts .
5 . Turn the nut (A) in 1–1 .5 turns clockwise,
until the groove in the chain vise is 0,8
mm wide in locked position
6 . Next you need to set the chain pusher
again . See section 5 .2 .6, "Set the chain
pusher" .
4 mm
×4
2.5 mm
×4
Combimatic_v2_EN_210315 33
Operation