Back View - Markusson Combimatic Owner's Manual

Combimatic

3 .3 Back view

B
Pos Part
A Pitch adjustment wing
Grinding head cover and grinding
B
wheel guard
C Top-plate angle scale
D Head-tilt angle scale
E Wire
Wire adjustment nuts
F
G Head-tilt angle nut
C
D
Description
Makes an approximate setting for the pitch .
Protects the grinding head and grinding wheel; it also protects the
user from sparks during grinding .
Shows the top-plate angle on a scale from 0-35° . Default: 30° . It is
set using the top-plate angle screw (O in Front view illustration) .
Shows the head-tilt angle on a scale from 50-90° .
Default: 60° .
Controls the vertical movement of the grinding head .
Adjusts the wire that controls the vertical movement of the grinding
head .
Sets the head-tilt angle on the head-tilt angle scale . (D)
Product Description
E
F
Combimatic_v2_EN_210315 9
A
G