Signs And Symbols - Markusson Combimatic Owner's Manual

Safety
CAUTION Only use accessories that are supplied or approved by the manufacturer .
CAUTION If the pitch is not correctly set the chain will be pushed into an incorrect sharpening position . This
may result in a damaged chain .
CAUTION If the metal of a cutting link turns blue during grinding, the speed is set too high and the metal is
overheated . This can cause the metal in the cutting tooth to lose its properties . Replace the damaged cutting link or
sharpen the chain again .
CAUTION It is recommended that the tool is always supplied via a residual current device having a rate
residual current of 30 mA or less .
CAUTION Clean the power tool . To prevent that it breaks, remove grinding dust every day . Use a vacuum
cleaner, brush or similar to clean the machine .

2 .3 Signs and symbols

See the table below for information about the signs and symbols on the product:
Sign/Symbol
6 Combimatic_v2_EN_ 210315
Description
Warning! A warning tells you about conditions that can cause injury or death, if you do not obey the
instructions . Do not continue until all conditions are accepted and engaged .
Risk for cutting injuries . Keep fingers away from the area when the machine is on .
Risk for pinching injuries . Keep fingers away from the area when the machine is on .
Before you install, operate or do maintenance on the machine, you must read the safety information
in the User manual . Obey the instructions to prevent injuries or damage to the equipment .
Always wear protective gloves when using the machine .
Always wear protective glasses and ear protection when using the machine .
Combimatic