Table of Contents
Advertisement
Combimatic
• If the wire is damaged or worn, it must
be replaced; see section 8 .2, "List of
accessories" . When it has been replaced,
repeat steps 1–8 .
7 .
Set the chain pusher switch to OFF .
8 .
To set the wire so that the lifting arm meets
the flange:
• for a shorter time: turn the 2 nuts (D) in the
direction towards the machine .
• for a longer time: turn the 2 nuts (D) in the
direction from the machine .
9 .
Repeat steps 5–8 until the test is successful .
6 .7 Service
WARNING The user must only do
maintenance that is described in this manual on
the machine . Only approved and trained service
technicians can do service on the machine .
Contact the reseller if the machine needs to be
serviced . Pack it in its original packaging for safe
shipping .
D
Maintenance and Service
Combimatic_v2_EN_210315 37
Advertisement
Table of Contents
Troubleshooting
