Operate The Machine - Markusson Combimatic Owner's Manual

Operation

5 .3 Operate the machine

WARNING Always wear safety gloves,
protective glasses, ear protection, and any other
personal protective equipment suitable for the
current work task .
WARNING Stop the machine immediately if it
does not work correctly!
Note: For a video demonstration of how to install
and operate the machine, go to Markusson .se .
Note: Discard the chain when the longest part of the
cutting tooth is shorter than 4 mm, or if you find
cracks or burrs in the chain .
1 . Use the first, second and third digit buttons to
set the counter to the number of teeth that still
need to be sharpened on the chain .
See section 3 .6 .2, "Counter" for more
information about how to set the counter .
2 . Set the grinding wheel switch to ON to start
grinding motor .
30 Combimatic_v2_EN_ 210315
3 . Set the chain pusher switch to ON to start the
feeding of the chain and the movement of the
grinding head . The sharpening will start after
this .
4 . Press the reset button when the grinding head
moves downward the first time . This resets the
counter .
5 . Wait until the machine has sharpened the
set number of links . When the set number of
links are sharpened, the chain feeding and the
grinding stops .
6 . If required: Adjust the settings or reposition
the grinding head on the right or left side to
sharpen a double-link .
7 . If required: Use the first, second and third digit
buttons to set the counter to the number of
cutters that still need to be sharpened on the
chain . See section 3 .6 .2, "Counter" for more
information about how to set the Counter .
Combimatic