Set The Grinding Length; Test The Grinding Settings - Markusson Combimatic Owner's Manual

Combimatic
Grinding wheel diameter:
150 mm (5 .9")
(new grinding wheels)
140 mm (5 .5")
130 mm (5 .1")
5 . Repeat steps 1–2 until the grinding depth is
equal .

5 .2 .10 Set the grinding length

1 . To set the approximate grinding length, turn the
chain pusher adjustment knob:
• clockwise, to grind more, resulting in a shorter
cutter top plate, or
• counter-clockwise, to grind less, resulting in a
longer cutter top plate .

5 .2 .11 Test the grinding settings

1 . Set the chain pusher switch to ON . The chain
pusher arm will push the chain forward .
2 . Monitor the grinding wheel movements, and
check if the chain is sharpened .
3 .
Scale:
1–3
3–5
4–6
4 .
5 .
Important! If the chain has double tie straps, start
grinding on the first cutter behind the double-link .
If required: Turn the grinding depth knob,
located on the back of the grinding head, to
make minor adjustments for the grinding depth .
If required: Turn the chain pusher adjustment to
make minor adjustments for the grinding length .
Set the chain pusher switch to OFF when the
grinding head is in its uppermost position and
the chain lock is not engaged .
Combimatic_v2_EN_210315 29
Operation