Set The Chain Pusher - Markusson Combimatic Owner's Manual

Operation
5 . Tighten the locking handle to secure the chain .
6 . Gently press the chain with your hand to test
the tension . The chain should not slacken .
26 Combimatic_v2_EN_ 210315
7 . If the chain tension is too loose, repeat the
procedure .
Note: If you need to fit shorter chains, you can
order a longer tensioner . You can also order a
telescopic chain extension kit if you need to fit
longer chains . See section 8, "Accessories and
Spare Parts" .

5 .2 .6 Set the chain pusher

1 . Press the power button to turn on the machine .
2 . Press the grinding head positioning button to
move the grinding head so that it is tilted in the
correct start position for the next cutting link to
be ground .
3 . Lift the grinding head to its uppermost position .
Combimatic