Table of Contents
Advertisement
Reolink Wireless Camera
Step 2. Tap FTP Settings to complete the information required and click Save to
save all the settings.
Server Address: Type in the address of your FTP server and FTP Port. The default
FTP Port for Reolink products is 21.
User Name and Password: Enter the User Name and Password of your FTP server.
If there is no username and password required, please enable Anonymous FTP.
Upload Directory: Set an upload directory for device video recording. You may also
leave it blank.
Maximum File Length: You can enter the file length here.
File Type: Choose to upload both video and picture or picture only.
FTP Postpone: Set the record time limit after a motion is detected. This option is
only available when File Type is Video and FTP Schedule is Motion.
Transfer Mode: This option consists of Auto, PORT, and PASV three modes. We
recommend you choose the Auto option.
User Manual
66
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the E1 and is the answer not in the manual?
Questions and answers
Why does an E1 Pro inside camera ping all the time. FCC ID:- 2AL7V-E1PRO.
Lens will not rotate up after trying to input sd card. Cannot rotate lens up now to remove sd card. Please advise what is my next step
If the lens on your Reolink E1 Pro camera will not rotate up to remove the SD card, it may be obstructed by the SD card itself. Try the following steps:
1. Check for Obstructions – Ensure that nothing is physically blocking the lens from rotating upward.
2. Restart the Camera – Power off the camera and turn it back on to see if the issue resolves itself.
3. Manually Adjust – Gently try to move the lens upward if it is stuck, but avoid applying excessive force.
4. Reset the Camera – If the issue persists, perform a factory reset to restore default settings.
5. Contact Support – If none of the above steps work, consider reaching out to Reolink support for further assistance.
These steps may help free the lens and allow access to the SD card.
This answer is automatically generated