Table of Contents
Advertisement
Reolink Wireless Camera
5. Enter the Wi-Fi password of the selected Wi-Fi network (you may tap
to see
the Wi-Fi password you entered and double-check that the password is correct)
and then tap Next.
6. A QR code will be generated and displayed on your phone. Please place the QR
code on your phone in front of the camera's lens at a distance of about 20 cm (8
inches) and let the camera scan the QR code. After the QR code is scanned
successfully, tick "I have heard a beep sound from the camera" or "I have heard the
voice prompt" and tap Next.
Notes:
1. Please rip off the protection film of the camera's lens.
2. You may double tap on the QR code to enlarge it.
User Manual
8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the E1 and is the answer not in the manual?
Questions and answers
Why does an E1 Pro inside camera ping all the time. FCC ID:- 2AL7V-E1PRO.
Lens will not rotate up after trying to input sd card. Cannot rotate lens up now to remove sd card. Please advise what is my next step
If the lens on your Reolink E1 Pro camera will not rotate up to remove the SD card, it may be obstructed by the SD card itself. Try the following steps:
1. Check for Obstructions – Ensure that nothing is physically blocking the lens from rotating upward.
2. Restart the Camera – Power off the camera and turn it back on to see if the issue resolves itself.
3. Manually Adjust – Gently try to move the lens upward if it is stuck, but avoid applying excessive force.
4. Reset the Camera – If the issue persists, perform a factory reset to restore default settings.
5. Contact Support – If none of the above steps work, consider reaching out to Reolink support for further assistance.
These steps may help free the lens and allow access to the SD card.
This answer is automatically generated