Camera Introduction Set up the Camera Wired Setup Reset Button * Press for more than five seconds to restore the device to default settings. It is recommended that the initial setup be completed with the Ethernet cable. You may follow the Micro SD Card Slot steps below to set up your camera.
Page 4
NOTE: If you access the camera via the Reolink Client, you may click the Add Device icon and choose the UID option to enter the UID of your camera. The UID is on the camera body (right below the QR code).
Install the Camera Mount the Camera to the Wall For outdoor use, the camera must be installed upside down for better waterproof performance. Drill holes in accordance with the mounting Choose a proper direction of the camera template and screw the security mount to and then align the bracket to the security the wall.
• Set your password using only the characters Camera is Not Powering on on the keyboard. If your camera is not powering on, please try If these won’t work, please contact Reolink the following solutions: Support. • Plug the camera into another outlet.
Page 7
This equipment should be cause harmful interference to radio or televi- installed and operated with minimum distance Reolink declares that this product is in sion reception, which can be determined by This device contains licence-exempt transmit- 20 cm between the radiator and your body.
Page 8
U-NII-1, U-NII 2A, Factory Name: Shenzhen Reolink Reolink Official Store or a Reolink authorized The functions of Wireless Access U-NII 2C and U-NII-3 meets the 47 CFR FCC Technology Co., Ltd reseller.
Need help?
Do you have a question about the E1 Outdoor Pro and is the answer not in the manual?
Questions and answers