Coded Speed Dialling; Registering Numbers For Coded Speed Dialling - Canon SmartBase MPC600F/400 Fax Manual

7
Press OK.
8
Press Stop/Reset to return to standby mode.
To Delete a One-Touch Speed Dialling Entry:
4
Press and hold
5
Press OK.
6
Press Stop/Reset to return to standby mode.
• The registered name is automatically cleared when you clear the fax/telephone number.

Coded Speed Dialling

Registering Numbers for Coded Speed Dialling

1
Press Menu.
2
Use or to select TEL REGISTRATION.
3
Press OK.
4
Use or to select CODED SPEED DIAL.
5
Press OK.
6
Use or to select a coded speed dialling code (00 to
99).
• If a coded speed dialling code has already been registered, the number registered under that code appears.
• If a group is already registered under a coded speed dialling code, GROUP DIAL appears.
• You can also select a code by pressing Coded Dial and then entering a two-digit code with the numeric
buttons.
7
Press OK twice.
3-4
to delete the fax/telephone number.
NAME
DATA ENTRY OK
Ex:
1-TOUCH SPD DIAL
07=
Ex:
TELEPHONE NUMBER
TEL=
TELEPHONE NUMBER
ERASING END
1-TOUCH SPD DIAL
2.NAME
MENU
4.TEL REGISTRATION
Ex:
TEL REGISTRATION
1.1-TOUCH SPD DIAL
TEL REGISTRATION
2.CODED SPEED DIAL
CODED SPEED DIAL
00=
Ex:
CODED SPEED DIAL
02=
Ex:
CODED SPEED DIAL
1.TELEPHONE NUMBER
TELEPHONE NUMBER
TEL=
:A
2131 1250