Canon SmartBase MPC600F/400 Fax Manual page 72

Name
6. COLOUR DIRECT
TX
4. RX SETTINGS
1. ECM RX
2. FAX/TEL AUTO SW When the machine is set to FAX/TEL AUTO SW,
1. RING START
TIME
2. F/T RING TIME Selects the length of time the machine rings when
3. DEFAULT
ACTION
3. INCOMING RING
RING COUNT
4. MAN/AUTO SWITCH When the machine is set to MANUAL MODE,
F/T RING TIME
* Even if you have set INCOMING RING to ON, ringing will only occur if you have connected a telephone
to your machine.
9-6
Description
Enables/disables sending of colour documents from
the ADF to fax machines that do not have colour
faxing capability. ( p. 4-1)
OFF:
Colour documents cannot be sent to fax machines
that do not support colour faxing.
ON:
Colour documents can be sent to fax machines that
do not support colour faxing. (The document is
converted to black & white.)
Enables/disables Error Correction Mode (ECM)
during reception.
you can set its details. (
Selects the time the machine takes to check whether
a call is from a fax machine or a telephone.
the call is a voice call.
Sets whether the machine switches to receive mode
after the ring time set in F/T RING TIME has
elapsed.
When the machine is set to FAX ONLY MODE or
FAX/TEL AUTO SW enables/disables ringing
when the machine receives a call.*
Selects the number of incoming rings before the
machine begins receiving.
determines if the machine switches to fax receive
mode after it rings for a specified time.
If you select ON above, selects the length of time the
machine rings before switching to fax receive
mode.
p. 5-2)
Settings
OFF
ON
ON
OFF
-
8 SEC
(0 to 30)
22 SEC
(10 to 60)
RECEIVE
DISCONNECT
OFF
ON
2 TIMES
(1 to 99)
OFF
ON
15 SEC
(1 to 99)