Changing/Deleting A Coded Speed Dialling Entry - Canon SmartBase MPC600F/400 Fax Manual

3
8
Use the numeric buttons to enter the fax/telephone number
you want to register (max. 120 digits, including spaces and
pauses).
• Use to enter a space and move the cursor to the next digit. Spaces are optional and are ignored during
dialling.
• Press Redial/Pause to enter a pause.
• If you make a mistake, press
entered.
9
Press OK twice.
10
Use the numeric buttons to enter the name that goes with
the number (max. 16 characters, including spaces).
• If you do not want to register a name, ignore this step.
• If you are unsure how to enter characters,
11
Press OK.
12
To continue registering other coded speed dialling codes, repeat the procedure from step 6.
-or-
Press Stop/Reset to return to standby mode.
• You can print the CODED SPEED DIAL LIST showing all the numbers and names registered for coded speed
dialling ( p. 3-9). Keep this list near your machine for easy reference when dialling.

Changing/Deleting a Coded Speed Dialling Entry

1
Follow steps 1 to 5 of "Registering Numbers for Coded Speed Dialling". (
2
Use or to select the coded speed dialling code
assigned to the entry you want to change or delete.
• You can also select the code by pressing Coded Dial and then
entering the two-digit code with the numeric buttons.
3
Press OK twice.
to delete the last number or press and hold
p. 2-1.
TELEPHONE NUMBER
TEL=1 49 39 25 25
Ex:
to delete all numbers you
TELEPHONE NUMBER
DATA ENTRY OK
CODED SPEED DIAL
2.NAME
NAME
NAME
Canon FRANCE
Ex:
NAME
DATA ENTRY OK
Ex:
CODED SPEED DIAL
03= 516p488 6700
Ex:
p. 3-4)
CODED SPEED DIAL
32= 81 773 3115
Ex:
CODED SPEED DIAL
1.TELEPHONE NUMBER
TELEPHONE NUMBER
TEL=81 773 3115
Ex:
:A
3
:A
:A
3-5