Coded Speed Dialling; Storing Numbers For Coded Speed Dialling - Canon Fax-L260i User Manual

Coded Speed Dialling

Storing Numbers for Coded Speed Dialling

You can store up to 100 numbers for coded speed dialling. Follow this procedure to
store coded speed dialling numbers and names.
If the receiving fax (G3 or G4 standard) is connected to an ISDN line, set the TX
MODE to G4/G3. If it is a G3 fax connected to a normal telephone line, set the TX
MODE to G3. (You can still use G4/G3 mode but G3 mode has a simpler, and
therefore quicker, connection procedure.)
If the receiving fax supports the ITU-T standard, you can set Coded Speed Dialling
numbers for fax transmission and set an ITU-T subaddress and password.
The ITU-T subaddress and password serve the same purpose as the bank account
number and a personal identification number on your bank card. Just as you cannot
complete a bank transaction without your account number and your personal
identification number, you cannot send or receive password/subaddress protected
documents if the subaddress and password do not match.
1. Press FUNCTION.
2. Press
3. Press START/COPY, then use
Chapter 4
or to select TEL REGISTRATION.
FUNCTION
TEL REGISTRATION
or to select CODED SPEED DIAL.
CODED SPEED DIAL
Speed Dialling 4-15