Canon SmartBase MPC600F/400 Fax Manual page 26

8
Enter the one-touch and/or coded speed dialling numbers you want to register in the group.
• You cannot register numbers in groups that have not been registered for speed dialling.
• You can review the numbers registered under the group by pressing
- If you want to delete one of these numbers from the group, press and hold
displayed).
- If you want to delete all numbers in the group, press and hold
numbers will cancel the group. (The registered names are automatically cleared when you cancel a group.)
- If you want to add a number to the group, press the one-touch speed dialling button or the coded speed
dialling code to which the number is assigned.
• You can cancel registering numbers and return to standby mode by pressing the Stop/Reset anytime before
pressing OK in step 9.
To enter a destination registered for one-touch speed dialling:
Press the one-touch speed dialling button assigned to each
number you want to register in the group. Repeat for other
buttons.
To enter a destination registered for coded speed dialling:
Press Coded Dial, then use the numeric buttons to enter
the two-digit code assigned to the number you want to
register in the group. Repeat for other codes.
9
Press OK twice.
10
Use the numeric buttons to enter a name for the group
(max. 16 characters, including spaces).
• If you do not want to register a name, ignore this step.
• If you are unsure how to enter characters,
11
Press OK.
12
To continue registering other groups, repeat the procedure
from step 6.
-or-
Press Stop/Reset to return to standby mode.
• You can print the GROUP DIAL LIST showing all the numbers and names registered for group dialling (
Keep this list near your machine for easy reference when dialling.
3-8
until all numbers are deleted. Deleting all
Ex:
Ex:
Ex:
p. 2-1.
Ex:
Ex:
or .
(ERASING END is
TEL= 2 50921
04 Canon ITALIA
TEL= 1 49 39 25 25
02 Canon FRANCE
GROUP DIAL
2.NAME
NAME
NAME
Canon GROUP 2
NAME
DATA ENTRY OK
GROUP DIAL
04=1-TOUCH SPD DIAL
:A
:1
:1
p. 3-9).