Cancelling Polling Receiving; Receiving While Performing Other Tasks; Receiving Faxes In Memory When A Problem Occurs; Cancelling Receiving - Canon SmartBase MPC600F/400 Fax Manual

Canon fax machine mpc600f/400 guide
Table of Contents

Advertisement

3
Enter up to 110 fax numbers using any of the following methods:
One-touch speed dialling:
Press the desired one-touch speed dialling button(s).
Coded speed dialling:
Press Coded Dial, then use the numeric buttons to enter the
two-digit code. Repeat for other codes.
Regular dialling:
Use the numeric buttons to enter the fax number, then press OK.
• If you enter an incorrect destination, press and hold
• If you want to review the numbers you entered, use
scroll through the numbers.
4
Press Start to begin polling the fax machine(s).

Cancelling Polling Receiving

To cancel polling receiving, follow the same procedure as for cancelling receiving. (

Receiving While Performing Other Tasks

Since the machine is a multitasking device, it can receive faxes and voice calls while you are performing other
tasks. If you receive a fax while you are performing certain tasks, the machine stores the incoming fax in
memory. Then, as soon as you finish your task, the machine automatically prints the fax.

Receiving Faxes in Memory When a Problem Occurs

If the machine encounters a problem when it is receiving a fax, the machine automatically stores the unprinted
pages of the fax in memory, and the LCD displays REC'D IN MEMORY as well as one or more messages.
For an explanation of the message(s) and details on the action to take,
• The machine memory can store up to approximately 270 pages.*
• Once the pages are printed, they are deleted from memory.
• If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask them
to resend the remainder of the fax.
* Based on Canon FAX Standard Chart No. 1, standard mode.

Cancelling Receiving

Follow this procedure if you want to stop receiving a fax before reception is completed:
1
Press Stop/Reset.
• The machine asks you to confirm that you want to cancel.
2
Press
to cancel receiving.
• If you change your mind and want to continue receiving, press
.
5-6
TEL=
04 Canon ITALIA
Ex:
TEL=
*02 Canon FRANCE
Ex:
TEL=
to delete it.
Ex:
or
to
p. 8-1.
CANCEL?
YES=(*)
27/12 2002 FRI 15:30
TX/RX CANCELLED
Ex:
27/12 2002 FRI 15:30
TX/RX NO.
Ex:
2 50921
1 49 39 25 25
9057951111
below)
NO=(#)
5003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartBase MPC600F/400 and is the answer not in the manual?

This manual is also suitable for:

Smartbase h12219

Table of Contents

Save PDF