Page 1
Setting Up Your MX372 In Default Mode (Tel Priority Mode) Without An Answering Machine Next...
Page 2
Fax Easy Setup Click Next to step through this image-friendly version of Fax Easy Setup. If you started Fax Easy Setup, on the fax machine’s operation panel, and prefer to go through this image-friendly version… Step 1 Step 2 Press the FAX button at any screen Click Next to proceed...
Page 4
Fax to Phone Line Connection Before Hand Set Wall Jack (Phone) (Existing Phone Cord) After Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 5
Fax to Phone Line Connection • Plug the provided phone cord into the wall jack Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 6
Fax to Phone Line Connection • Plug the provided phone cord into the “LINE” jack located on the rear of the multifunction Wall Jack Hand Set (Phone) (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 7
Fax to Phone Line Connection • Remove the white plug from the upper jack labeled “EXT.” Wall Jack Hand Set (Phone) (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 8
Fax to Phone Line Connection • Plug the second phone cord into the “EXT.” jack located on the rear of the multifunction Wall Jack Hand Set (Phone) (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 9
Fax to Phone Line Connection • Plug the second phone cord into the phone Wall Jack Hand Set (Phone) (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 11
Step 1 Step 2 Turn on the MX372 by pressing the Press the FAX button. ON button if it is not powered on already. Previous Next...
Page 12
Step 3 Step 4 The fax standby screen will appear. Press the Menu button. Previous Next...
Page 13
Step 5 Step 6 The FAX menu screen will appear. Use the LEFT or RIGHT button to select “Receive mode set”. Previous Next...
Page 14
Step 7 Step 8 Press the OK button. Use the LEFT or RIGHT button to select “TEL priority mode”. Previous Next...
Page 15
Step 9 Step 10 Press the OK button. Use the LEFT or RIGHT button to select “Yes” at Make adv. settings screen. Previous Next...
Page 16
Step 11 Step 12 Press the OK button. Use the LEFT or RIGHT button to select “User-friendly RX”. Previous Next...
Page 17
Step 13 Step 14 Press the OK button. Use the LEFT or RIGHT button to select “ON”. Previous Next...
Page 18
Step 15 Step 16 Press the OK button. You will return to the “Fax standby screen” and the receive mode will appear on the screen. Previous Next...
Page 19
Receiving A Fax To receive a fax: • Pick up the handset on the phone connected to the MX372. • Listen for fax tones. • When the tones stop hang up the handset. • The MX372 will receive the fax document.