Canon SmartBase MPC600F/400 Fax Manual page 71

9
Name
2. RX REPORT
3. ACTIVITY REPORT Enables/disables automatic printing of an
3. TX SETTINGS
1. ECM TX
2. MID PAUSE SET
3. AUTO REDIAL
1. REDIAL TIMES
2. REDIAL
INTERVAL
4. TIME OUT
5. TX START SPEED
Description
Enables/disables automatic printing of a reception
report. ( p. 7-4)
OUTPUT NO:
No report is printed.
PRINT ERROR ONLY:
Prints a report only when a reception error occurs.
OUTPUT YES:
Prints a report every time you receive a document.
ACTIVITY REPORT after every 20 transactions.
( p. 7-2)
Enable/disables Error Correction Mode (ECM)
during transmission.
Selects the length of the pause entered when you
press Redial/Pause.
Enables/disables automatic redialling if the other
party's line is busy on the first attempt. (
Selects the number of redial attempts.
Selects the period of time between redial attempts.
Enbles/disables automatic scanning of documents
after entering a fax number using speed dialling or
redialling.
ON:
Scanning begins automatically five seconds after
entering the fax number (10 seconds if sending to
multiple destinations).
OFF:
Scanning does not start automatically. (You need to
press Start to begin scanning.)
Selects the speed at which the machine start
transmitting.
Settings
OUTPUT NO
PRINT ERROR
ONLY
OUTPUT YES
AUTO PRINT ON
AUTO PRINT OFF
ON
OFF
2 SEC
(1 to 15)
ON
p. 4-10)
OFF
2 TIMES
(1 to 10)
2 MIN.
(1 to 99)
ON
OFF
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
9
9-5