Table of Contents
Advertisement
4
Press Start to begin scanning for sending, or wait a few seconds for the machine to begin scanning
automatically.
• The machine will first send the document to the one-touch speed dialling destinations, then the coded speed
dialling destinations, and finally to the destination dialled using regular dialling.
• If you prefer the machine never to scan a document automatically after a few seconds, disable the TIME OUT
setting. (
p. 9-5)
• To cancel sending, press Stop/Reset then
cancelled (you cannot cancel only one destination), and the machine will print a MULTI TX/RX REPORT.
(
p. 7-4)
• If a number is busy, the machine will continue sending to the other destinations and then redial the number that was
busy.
• If the machine's memory becomes full while scanning your document, MEMORY FULL will appear in the LCD. If
this happens, remove the other documents from the ADF, and then press Resume. The document remaining in the
ADF will be ejected automatically. Divide the documents into several sections and send each section separately.
• If you send a colour document to a fax machine that does not support colour faxing, or TRY AGAIN IN B&W
displays in the LCD,
4-12
. Sending to all destinations you specified in step 3 will be
p. 4-1.
Advertisement
Table of Contents
