Running Individual Tests; Single Tests For Twisted Pair Cable - Fluke CableAnalyzer DSP-4000 Series User Manual

Chapter 4 provides the following information:
•
Instructions for running Single Tests on twisted pair cable.
•
Descriptions of the test results produced by the HDTDX™ analyzer and
HDTDR™ test.
•
Instructions for running Single Tests on coaxial cable.
•
Instructions for using the tests available in the MONITOR mode.
•
Instructions for using the tone generator.

Single Tests for Twisted Pair Cable

The SINGLE TEST mode on the rotary switch allows individual execution of the
tests available in the Autotest mode, except the ACR and ELFEXT tests. SINGLE
TEST mode features two additional tests: the HDTDX (High-Definition Time
Domain Crosstalk) analyzer and the HDTDR (High-Definition Time Domain
Reflectometry) test.
Single tests help you isolate cable failures and quickly determine if repairs are
good. To certify a cable installation, you should run an Autotest with the
appropriate test standard.

Running Individual Tests

Chapter 4
4-1