Fluke CableAnalyzer DSP-4000 Series User Manual page 36

DSP-4000 Series
Users Manual
Item
A
Rotary Switch
T
B
C
D
!@
E
#$
F
L R U D
G
H
I
S
J
K
L
LIA connector and
latch
M
RS-232C serial
port
N
2.5 mm phone jack
2-18
Table 2-4. Main Unit Features
Feature
Selects the test tool's modes.
Starts the highlighted test or restarts the test last run.
F
Automatically provides more specific information on the cause
of an Autotest failure.
e
Exits the current screen without saving any changes you made.
Provide functions related to the concurrent display. Softkey
functions are shown in the display area above the keys.
Display A LCD display with backlight and adjustable contrast.
Allow left, right, up, and down movement on the display.
Increase or decrease the numerical values of user-definable
parameters.
C
Controls the display backlight. Pressing for 1 second allows
adjustment of the display contrast. Reactivates the test tool
when the tool is in power down mode.
V
Lets you use the headset for two-way voice communication
over twisted pair or fiber cable.
Saves Autotest results and parameter changes in memory.
E
Selects the highlighted item from a menu.
Connector and latch for the link interface adapters (LIAs).
A 9-pin connector for interfacing with a printer or host computer
via a standard IBM-AT EIA RS-232C serial cable.
Connection for the headset supplied with the test tool.
Description