Fluke CableAnalyzer DSP-4000 Series User Manual page 201

Editing the Header Information
CableManager lets you edit the header information for each of your reports. For
example, if you accidentally entered the wrong cable identifications for some of
your tests, you can correct the information before saving or printing the reports.
You can modify the Cable ID for only one report at a time.
1. Select the report or reports in the report summary list.
To select a block of reports, click on the first report in the block; then hold
down the Shift key and click on the last block.
To select multiple, nonconsecutive reports, hold down the Ctrl key and click
on the reports.
2. Click on
3. In the
Modify Autotest Report
click .
OK
Rearranging, Adding, and Removing Headers
You can rearrange the report summary headers and choose which items are shown
on printed summaries as follows:
1. From the
2. To add or remove items from printed summaries, check or uncheck the box
under Print?
3. Click on the item you want to move.
4. Click on
position.
5. Repeat steps 3 and 4 as necessary. Click
; then select
Edit Single-Report Modify
menu choose
Options
.
or
Move Item Up Move Item Down
Getting Started with CableManager Software
Organizing and Editing Your Project
Note
or
Multi-Report Modify
box, enter the new header information; then
.
List Items
until the item is in the desired
when finished.
OK
B
.
B-11