3: Installing The Cvb Into A Rack; Before You Begin; Warnings - EKE-Electronics CVB1621A Technical Manual

3: Installing the CVB into a
rack
This chapter includes instructions on how to install the EKE-Trainnet
a rack.
The following topics are covered in this chapter:

Before you begin

Installation procedure
Firmware loading
Problems in the installation
3.1 Before you begin
Read the following sections carefully before you start installing the CVB module.

3.1.1 Warnings

This section contains warnings you need to consider before and during the CVB
installation.
Do not turn on the rack power before you have finished the installation.
Never connect the CVB module to, or remove it from, a rack with active
power, as this can damage the CVB module or other modules in the
system. Always turn off the rack power first.
Electrostatic discharge can damage electronic circuits. Always handle the
module at a static free workstation. If this is not possible, ground yourself
using a wrist strap and a resistive connection cord.
CVB1621A and CVB2456A Technical Manual, ver. 3.00
®
CVB module into
11