Advertisement
DP-4X ADJUSTMENT MARKER MOVEMENT USING CH DW KEY
ADJUSTMENT MARKER MOVES CLOCKWISE SPIRALING OUT BY CH DW KEY:
Remote must be in Digital Convergence Adjustment Mode. See page 08-18.
As always, the adjustment procedure should begin in the Center of the screen and work outward in a Clock-
wise spiral to the outside of the screen This give the best over all adjustment. New for this year is the activity of
the adjustment point when the CH DW or CH UP key is pressed. The Adjustment point always begins in the
Center position. (See Figure 1)
With each press of the CH DW (Channel Down) key on the Remote control, the adjustment point will move
one position Clockwise from the Center. (See Figure 2). Here the Adjustment point (Cursor) has moved on
Stopping Position Clockwise from Center.
Adjustment Point Starts in Center
Adjustment Point Marker.
Figure 1
Press CH DW (Channel Down) Marker Moves
Adjustment Point Marker Moves
Clockwise Spiraling Outward.
Figure 2
Continued on Next Page
PAGE 06-10
Advertisement
