Advertisement
DP-47 REMOTE CONTROL CLU-3842WL HL02062
When Convergence is adjusted
by this Remote,
this Remote must be changed to
DCU mode.
Remote begins in TV mode.
While holding the "ENT" key,
press "MENU" then "INFO" keys.
TV LED will blink 3 times.
Can not change Source Access.
INITIALIZE
(Aspect then Stop) Keys
Pressed by itself produces
extra lines at outside edge.
ROM WRITE Press twice.
CALCULATE
REMOVE COLOR
Outside Signal + Grid
Outside Signal + Cursor
Outside Signal w/o Cursor
ADJUSTMENT
DCU PHASE in DCAM
then press EXIT
MUTE Clears Warning Displays
NOTE: Sensor Error Code place
Remote and TV in DCAM,
press DAY/NIGHT then
ADJUSTMENT POINT UP
ADJUSTMENT POINT DOWN
ADJUSTMENT POINT LEFT
NOTE: The 3X3 mode can only
be entered after the RAM is
cleared.
With Power Off press and hold
the Service Only switch.
Then Press the Power Button.
TV
DVD CBL
STB PVR AMP
SOURCE ACCESS
ENT
ASPECT DAY/NIGHT
PIP
GUIDE
MENU
EXIT
SELECT
C.C.
INFO
INPUTS
VOL
CH
(PUSH TO
(PUSH FOR
MUTE)
FAV CH)
1
2
3
4
5
6
7
8
9
0
LC
HITACHI
HITACHI
HITACHI
HITACHI
To return to normal TV mode.
Remote begins in TV mode.
Hold down the ENT key and
enter 1345 (Hitachi Pre-Code).
RASTER POSITION
Volume Up and Down is a Wheel.
Pressing acts as a button for MUTE.
Channel Up and Down is a Wheel.
Pressing acts as a button for
FAV CH (Favorite Channel).
SINGLE CROSSHAIR
ROM READ Press twice.
(Read Old ROM Data)
CROSSHATCH / VIDEO
(Press 5 Times)
Toggles between Red and
Blue Adjustment Mode
GREEN Select
3X3 Mode (Press 5 Times)
BLUE Select
13X9 Mode
(Press 5 Times)
CH UP Moves
Adjustment Point
Counter Clockwise
Spiraling Outward
CH DW Moves
Adjustment Point
Clockwise Spiraling
Outward
ADJUSTMENT
POINT RIGHT
Removes
Adjustment Marker
RED Select
7X5 Mode
(Press 5 Times)
PAGE 06-07
Advertisement
