Advertisement
DP-4X HORIZONTAL SIZE ADJUSTMENT
If you are continuing from previous adjustment (V Size) begin at step (3).
HORIZONTAL SIZE:
1) Receive an NTSC
signal.
2) With Power Off, press
the Service Only switch
on the Def/Conv. PWB.
while holding the MENU
key on the remote. Then
press the MENU button
on the front Control
Panel for 3 Seconds.
This will bring up the
Cleared RAM and the
Service Menu.
3) Select GREEN by
pressing the (INFO)
key.
4) Press the MENU button
to remove Red and
Blue.
5) Use the Thumbstick to
scroll down to H Size.
6) Adjust H Size Data
using the Thumbstick
Left and Right.
7) Adjust Horizontal Size
Data while observing
the screen to match
sizes in the Table
Below.
Screen Size
51 inch (16X9 Aspect)
57 inch (16X9 Aspect)
65 inch (16X9 Aspect)
NOTE:
Centering magnet may
be moved to facilitate.
Distance is important,
not centering.
NOTE:
Do not use the Hash
marks on the
Overlay as they may be
incorrect and/or the
Horizontal Size
specifications may
change to improve
performance.
L=
1070 mm
1195 mm
1365 mm
PAGE 08-14
Advertisement
