Advertisement
This picture shows a close up view of the DP-45 Rear Panel.
(1) ANTENNA INPUTS: Note that the main difference from previous models is that there are only to
F59 (RF) inputs. Antenna A feeds the Main Tuner, Sub (PinP) Tuner and the ATSC Tuner.
When switched to Antenna B, the RF feeds the Main Tuner and the ATSC Tuner.
The Sub PinP Tuner does not receive RF inputs from Antenna B.
(2) AUDIO INPUTS: For inputs 1, 2, 3 and 4.
(3) MONITOR OUT: What ever has been selected for the Main Picture will be available on the
Monitor Out.
S-Out is only available when S-In is used.
Audio to Hi-Fi can be set by the customer's Menu to be either
Fixed: Use this for feeding Audio Out to an external Audio Decoder.
Variable. Do not use for external Audio Decoder. This output is volume controlled.
(4) COMPOSITE or S-IN INPUTS THREE and FOUR.
(5) COMPONENT INPUTS ONE and TWO.
(6) HDMI INPUT. See page 07-04 for an example of the comparison between HDMI and DVI from
the previous models.. HDMI is the next generation from DVI.
(7) OPTICAL AUDIO OUT. Any audio signal is routed back into the Digital Module and is available
as Optical Audio Out. Note: There is no Dolby decoder in this set. Any Dolby decoding must be
performed using an external device. Optical Audio Out will have Dolby encoding is available for
the source.
(8) MULTI-MEDIA SLOT:. This is for upgrading the Digital Module in the future.
(This is not for Photos).
(9) RS232C. For use with third party home Audio/Video control systems which are commercially
available.
(10) TV AS CENTER: These jacks are for stereo amplifiers with center signal output capability.
This feature allows the TV speakers to be used as a center speaker. The TV must be set
as a center channel by selecting "TV as Center" on the Internal Speakers Settings of the
Audio Menu
(11)
POD is the Purchase on Demand slot for Cable Television purchase of Pay for View Movies.
DP-4X CHASSIS PICTURES
PAGE 07-06
Advertisement
