Advertisement
The Service Policy for the models on the right is;
"Board Level Repair". See below for PWB parts list.
It's not necessary for a PWB to be replaced if there can be found a simple repair. Ser-
vicer Discretion Advised
NOTE 1: All Chassis.
When replacing the Signal PWB or Main Chassis, remember to write down the field
adjustments data values to re-enter them in the new Signal PWB I2C.
Side Pin Adjust, Vertical Size Adjust, Horz. Size Adjust, Trapezoid Adjust
Sub Brightness Adjustment, White Balance Adjustment, Horz. Position Adjust (Fine)
As these will be incorrect with then new EEPROM.
NOTE 2: DP-45 and DP-47 Chassis Only:
If the Signal PWB is changed, be sure to check the Version of Software to confirm you have the correct and cur-
rent Version of Software.
NOTE 3: DP-45 and DP-47 Chassis Only:
If the Signal PWB is changed, the POD (Purchase on Demand) CableCard may no longer work. The Card will
have to be Re-Initialized.
Chassis
Main Chassis
Comes with Tuner PWB, CRT PWBs, Front Control PWB, Flex Converter,
HDMI Module, Digital Module, Magic Focus Interface PWB and Audio Out-
puts.
Signal PWB w/o power supply.
Comes with Tuner PWB, Flex Converter, HDMI Module, Digital Module and
Audio Outputs.
Power/Deflection PWB.
Comes with Convergence and Sub Deflection PWB.
DP-47 Chassis
Signal (Sub) Power Supply.
Vertically mounted on the Signal PWB
Convergence Output PWB.
Mounted on top of the Deflection PWB
Sub Deflection
Sensor (Magic Focus)
IR (Receiver)
HDMI PWB
Tuner PWB
CRT PWBs
DP-4X SERVICE POLICY
Current Version is Ver 136
PWB
Model
Chassis
DP-47
57S715
51S715
DP-47
51F710
DP-45
DP-45
57F710
65F710
DP-45
57F510
DP-43
51F510
DP-43
Part Numbers
UE23121
JT24471
JT24481
HA01311
JT24511
X480284
X480285
X480286
JT24491
JT24521
JT24501
Continued on Next Page
PAGE 10-01
Advertisement
