Advertisement
DP-4X DIGITAL CONVERGENCE INTERFACE CIRCUIT EXPLANATION
ever, any manual adjustment data is lost.
If 9 Point Manual Adjustment was Selected: This
represents the Grid Display.
After making any adjustment in either 9 Point or 117 Point, press the EXIT key.
Then the Manual Adjustment Mode Menu will
appear. See Figure to the Right.
At this point, the customer can make the fol-
lowing selections:
•
Cancel: This will cancel any adjustments
made and return the set to the condition it
was in before any adjustments were made.
•
Done: This will memorize the Customer's
adjustment data.
•
Back: This will return to the the Last Ad-
justment mode grid, either 9 Point or 117
Point so the customer can continue making
adjustments.
•
Reset: Puts the set back into the state of
convergence it was in before making any
adjustments..
If 117 Point Manual Adjustment was Selected:
This represents the Grid Display.
PAGE 06-05
Advertisement
