Self-Diagnosis Function - Sony Handycam Vision DCR-TRV9E Operating Instructions Manual

English

Self-diagnosis function

The camcorder has a self-diagnosis display.
This function displays the camcorder's condition
with five digits (a combination of a letter and
figures) on the LCD screen or in the viewfinder.
If this occurs, check the following code chart. The
five-digit display informs you of the camcorder's
current condition. The last two digits (indicated
by ππ) will differ depending on the state of the
camcorder.
Five-digit display
C:21:ππ
C:22:ππ
C:31:ππ
C:32:ππ
E:61:ππ
E:62:ππ
If you are unable to resolve the problem, contact your Sony dealer or local authorized Sony service
facility.
LCD screen/viewfinder
Self-diagnosis display
•C:ππ:ππ
You can service the camcorder
yourself.
•E:ππ:ππ
Contact your Sony dealer or local
authorized Sony facility.
Cause and/or corrective actions
•Moisture condensation has occurred.
m Remove the cassette and leave the camcorder for at least 1 hour.
(p. 100)
•The video heads are dirty.
m Clean the heads using the Sony DVM12CL cleaning cassette (not
supplied). (p. 101)
•A serviceable situation not malfunctioned above has occurred.
m Remove the cassette and insert it again, then operate the
camcorder. (p. 12)
m Disconnect the power cord of the AC power adaptor or remove
the battery pack. After reconnecting the power source, operate
the camcorder.
•A camcorder malfunction which you cannot service has occurred.
m Contact your Sony dealer or local authorized Sony service
facility and inform them of the five digits. (example: E:61:10)
STBY
C : 21: 00
40min
40min
111