Using Service Jig; Self-Diagnosis Function - Sony DCR-DVD306E Service Manual

1-3. USING SERVICE JIG

Connect the extension cable (J-6082-572-A) between the DVD mechanism deck and CN1008 on the VC-484 board.
VC-484 board (side B)
Extension cable (10P)
(J-6082-572-A)
Flexible board (10P)
DVD mechanism deck

1-4. SELF-DIAGNOSIS FUNCTION

1-4-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
C : 3 1 : 1 1
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
DCR-DVD306E/DVD308/DVD308E/DVD708/DVD708E_L2
CN1008
Blinks at 3.2Hz
1 1
C 3 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
1-4-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the "repaired by:", "block" in which the problem
occurred, and "detailed code" of the problem.
Detailed Code
Refer to "1-4-3. Self-diagnosis Code Table".
1-2
ENGLISH JAPANESE
ENGLISH JAPANESE