Troubleshooting; Self-Diagnosis Function - Sony FDR-X3000 Service Manual

2-1. SELF-DIAGNOSIS FUNCTION

Warning/
Error message
05-04 The remaining capacity of the memory card is insufficient for loop recording.
The battery necessary for shooting is not inserted.
05-05
Insert the charged battery.
05-06 Failed in to synthesize the motion shot LE.
05-07 Failed to shoot images.
06-01 Failed to format the recording media.
The memory card does not support XAVC S 100 Mbps movie recording.
06-02
Use an microSDXC memory card of Class 10 or higher when shooting in XAVC S format.
The memory card does not support XAVC S 100 Mbps movie recording.
06-04
(FDR-X3000/X3000R)
Use the memory card that supports UHS-I U3 standard when you are shooting in XAVC S 100 Mbps.
06-05 Failed to recover the memory card.
The memory card is not inserted properly
06-06
The memory card is damaged.
06-09 There is no memory card inserted.
Failed to play.
07-02
There is an abnormality in the recording media.
Set the necessary settings for Ustream using "Camera Settings for Live Streaming" of the Action Cam Movie
08-01
Creator's camera settings.
Log in to Ustream again and confirm the settings using "Camera Settings for Live Streaming" of the Action Cam
08-02
Movie Creator's camera settings.
The channel set by "Camera Settings for Live Streaming" of the Action Cam Movie Creator's camera settings is
incorrect.
08-03
This message also displays if other media starts streaming on the same channel while streaming from the camera
is performed. Set the channel again.
08-04 The total time of saved video on Ustream has reached the limit. Stop streaming video.
The saving settings of video cannot be saved to Ustream because an error has occurred on the network.
Some other network error has occurred.
08-05
Confirm the setting of the access point or the security of the access point using "Camera Settings for Live
Streaming" of the Action Cam Movie Creator's camera settings.
08-06 Access point has been found but is not connected. Check the password of the access point and connect again.
Access point cannot be found. Confirm the setting of the access point using "Camera Settings for Live Stream-
08-07
ing" of the Action Cam Movie Creator's camera settings.
08-08 Set the date and time again on your camera.
An unknown error has occurred on Ustream, when using the Live Streaming function. Wait a moment and then
08-09
try confirming the connection again.
10-02 Turn the power off and then on again.
A different battery pack is detected when the camera is powered on.
10-03 Battery pack deterioration is detected.
Battery charge is insufficient for operation.
10-04 Unable to record images because the camera temperature has risen.
The memory card does not contain playable images.
Recovering the memory card.
There is no remaining battery charge.
The camera temperature has risen. The power may turn off automatically, or you may be unable to record im-
ages. Leave the camera in a cool location until the temperature goes down.
If you record images for an extended period, the camera temperature rises. In this case, stop recording images.
Remaining capacity of the memory card is insufficient for recording.
The maximum number of files that can be recorded has been reached.
There is no memory card inserted.
The memory card is not inserted properly.
The memory card is damaged.
The camera is not connected to a TV when playback is started.
FDR-X3000/X3000R/HDR-AS300/AS300R
2. TROUBLE SHOOTING
Symptom/Correction
2-1