Table of Contents
Advertisement
Output Setting
1. Click any output port in blue area, the board where the port locates is selected. Users can do
settings to the board now.
A red rectangle flashes around the chosen port when it is clicked.
2.1 After DVI or HDMI board is selected, users can do the following settings in the edit section
after clicking
icon
2.1.1 Output Setting
Format Type, select ALL or Module；
When Module is selected, 47 Normal resolution types available, the highest is 4096x2160@59.94
which only works on HDMI 2.0 board.
If ALL is selected, users can choose Standard resolution (the same as Normal resolution above) or
Customize the resolution.
© Xiamen RGBlink Science & Technology Co., Ltd.
17
17 / 52
Ph: +86 592 5771197 |
|
support@rgblink.com
www.rgblink.com
Advertisement
Table of Contents
