Table of Contents
Advertisement
Tyre pressure
320
Restarting the tyre pressure loss warn-
ing system
Restart the tyre pressure loss warning system
if you have:
changed the tyre pressure
R
changed the wheels or tyres
R
fitted new wheels or tyres
R
Before restarting, make sure that the tyre
X
pressures are set properly on all four tyres
for the respective operating conditions.
The recommended tyre pressures can be
found in the table on the fuel filler flap.
The tyre pressure loss warning system can
only give reliable warnings if you have set
the correct tyre pressure. If an incorrect
tyre pressure is set, these incorrect values
will be monitored.
Observe the notes in the section on tyre
X
pressures (
Y
Make sure that the key is in position 2 in the
X
ignition lock (
Press the = or ; button on the steer-
X
ing wheel to select the
Press the 9 or : button to select
X
Tyre
Tyre pressure
pressure.
Press the a button.
X
The
Run Flat Indicator active
Run Flat Indicator active
Restart with
Restart
with OK OK
multifunction display.
If you wish to confirm the restart:
Press the a button.
X
The
Tyre press. now OK?
Tyre press. now OK?
appears in the multifunction display.
Press the 9 or : button to select
X
Yes
Yes.
Press the a button.
X
The
Run Flat Indicator restarted
Run Flat Indicator restarted
message appears in the multifunction dis-
play.
After a teach-in period, the tyre pressure
loss warning system will monitor the set
tyre pressures of all four tyres.
page 318).
page 141).
Y
Serv.
Serv.
menu.
message appears in the
message
If you wish to cancel the restart:
Press the % button.
X
or
If the
Tyre pressure now OK?
Tyre pressure now OK?
X
appears, use the 9 or : button to
select
Cancel
Cancel.
Press the a button.
X
The tyre pressure values stored at the last
restart will continue to be monitored.
Tyre pressure monitor
General notes
If a tyre pressure monitor system is fitted, the
vehicle's wheels have sensors fitted that
monitor the tyre pressures in all four tyres.
The tyre pressure monitor warns you if the
pressure drops in one or more of the tyres.
The tyre pressure monitor only functions if
the corresponding sensors are fitted to all
wheels.
Information on tyre pressures is shown in the
multifunction display. After a few minutes of
driving, the current tyre pressure of each tyre
is shown in the
Serv.
Serv.
tion display.
Example: current tyre pressure display
For further information on displaying this
message, refer to the "Checking the tyre pres-
sure electronically" section (
Important safety notes
It is the driver's responsibility to set the tyre
pressure to the recommended cold tyre pres-
sure suitable for the operating situation
(
page 318). Note that the correct tyre pres-
Y
sure for the current operating situation must
message
menu of the multifunc-
page 321).
Y
Advertisement
Table of Contents
