Table of Contents
Advertisement
Press the : or 9 button to select the
X
Dipped beams Setting for:
Dipped beams Setting for:
You will see the selected setting:
side traffic
side traffic
or
Left-side
Left-side traffic
Press the a button to save the setting.
X
If you change the setting, conversion does
not take place until the next time the vehi-
cle is stationary.
This function is only available on vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(
page 110).
Y
If you set the dipped-beam headlamps for
driving on the right/left, then motorway
mode and the extended range foglamps are
unavailable.
A qualified specialist workshop can set the
dipped-beam headlamps for driving on the
left/right.
Setting the brightness of the ambient
lighting
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
light Brightness
light
Brightness
monochrome display) or the
+/-
+/-
function (vehicles with colour multi-
function display).
You will see the selected setting.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to a level from
(bright).
Press the a or % button to save the
X
setting.
function.
Right-
Right-
traffic.
Settings
Settings
menu.
Ambient
Ambient
function (vehicles with
Amb. light
Amb. light
Off
Off
to
Level 5
Level 5
Menus and submenus
Activating/deactivating the surround
lighting and exterior lighting delayed
switch-off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround lighting
Surround lighting
Vehicles with a black and white multifunc-
tion display: you will see the selected set-
ting
on on
or
off
off.
Vehicles with a colour multifunction dis-
play: if the
Surround
Surround lighting
switched on, the light cone and the area
around the vehicle are displayed in orange
in the multifunction display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
Before leaving the vehicle, turn the key to
X
position 0 in the ignition lock.
Turn the key to position 2 in the ignition
X
lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated the
ing
ing
function and the light switch is set to
Ã, the following functions are activated
when it is dark:
surround lighting: the exterior lighting
R
remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
(
page 111).
Y
exterior lighting delayed switch-off: the
R
exterior lighting remains lit for 60 seconds
after the engine is switched off. If you close
Settings
Settings
menu.
function.
lighting
function is
Surround light‐
Surround light‐
Z
215
Advertisement
Table of Contents
