Mercedes-Benz SLK 2014 Owner's Manual page 217

Menus and submenus
214
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Instrument cluster Instrument cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent display Permanent display
You will see the selected setting
temperature temperature
Press the a button to save the setting.
X
i
The speed is displayed in mph.
Lights
Setting the daytime driving lights
The Daytime driving lights Daytime driving lights
only be switched on with the engine turned
off.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Daytime driving lights Daytime driving lights
Vehicles with a black and white multifunc-
tion display: you will see the selected set-
ting on on or off. off
Vehicles with a colour multifunction dis-
play: if the Daytime driving lights Daytime driving lights
function has been switched on, the cone of
light and the W symbol in the multifunc-
tion display are shown in orange.
Press the a button to save the setting.
X
Further information on daytime driving lights
( page 111).
Y
Settings Settings menu.
submenu.
function.
outside outside
or Dig. speedo Dig. speedo [mph] [mph].
function can
Settings Settings menu.
function.
Switching the Intelligent Light System
on/off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Intell. Light System Intell. Light System
Vehicles with a black and white multifunc-
tion display: you will see the selected set-
ting on on or off off.
Vehicles with a colour multifunction dis-
play: if the Intell. Light System Intell. Light System
tion has been switched on, the cone of light
and the L symbol in the multifunction
display are shown in orange.
Press the a button to save the setting.
X
When you activate the
tem tem, you activate the following functions:
Motorway mode
R
Active light function
R
Cornering light function
R
Extended range foglamps
R
If you set the dipped-beam headlamps for
driving on the right/left, the multifunction
display shows the Intell. Intell. Light
system inoperative Inactive for system inoperative Inactive for
left-side traffic left-side traffic
System: System System: System inoperative inoperative Inactive
for right-side traffic for right-side traffic
instead of the Intell. Light Intell.
tion in the Lights Lights submenu (
Further information on the Intelligent Light
System ( page 114).
Y
Setting the dipped-beam headlamps for
driving on the left/right
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Settings Settings menu.
function.
func-
Intell. Intell. Light Light Sys‐ Sys‐
Light System: System:
or Intell. Light Intell. Light
Inactive
display message
Light System System func-
page 214).
Y
Settings Settings menu.