Mercedes-Benz SLK 2014 Owner's Manual page 303

Hide thumbs Also See for SLK 2014:
Table of Contents

Advertisement

Battery (vehicle)
300
instrument cluster where it will be easily
seen by the driver.
Stop after driving for approximately ten
X
minutes and check the tyre pressure with
the tyre inflation compressor.
The tyre pressure must now be at least
130 kPa (1.3 bar/19 psi).
WARNING
G
If the required tyre pressure is not reached
after driving for a short period, the tyre is too
badly damaged. The tyre sealant cannot
repair the tyre in this instance. Damaged tyres
and a tyre pressure that is too low can signif-
icantly impair the vehicle's braking and driv-
ing characteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
i
In your vehicle, you will find a sticker with
the Mercedes-Benz Service24h telephone
number, e.g. on the B-pillar on the driver's
side.
Correct the tyre pressure if it is still at least
X
130 kPa (1.3 bar/19 psi) (see the fuel filler
flap for values).
To increase the tyre pressure: switch on
X
the tyre inflation compressor.
To reduce the tyre pressure: depress
X
pressure release button : next to pres-
sure gauge ;.
When the tyre pressure is correct, unscrew
X
the filler hose from the valve of the sealed
tyre.
Screw the valve cap onto the tyre valve of
X
the sealed tyre.
To remove the tyre sealant bottle from the
X
tyre inflation compressor, press together
the locking tabs on the yellow cap.
Pull the tyre sealant bottle out of the tyre
X
inflation compressor.
The filler hose stays on the tyre sealant
bottle.
Stow the tyre sealant bottle, the tyre infla-
X
tion compressor and the warning triangle.
Drive to the nearest qualified specialist
X
workshop and have the tyre changed there.
Have the tyre sealant bottle and the filler
X
hose replaced as soon as possible at a
qualified specialist workshop.
Have the tyre sealant bottle replaced every
X
four years at a qualified specialist work-
shop.
Battery (vehicle)
Important safety notes
Work on the battery, e.g. removing or fitting,
requires specialist knowledge and the use of
special tools. Therefore, always have work on

Advertisement

Table of Contents
loading

Table of Contents