Table of Contents
Advertisement
When you remove the key from the ignition
lock, the mobile phone is disconnected from
the hands-free system. Active calls will first
be transferred to the mobile phone directly.
Garage door opener
General notes
®
The HomeLink
garage door opener integra-
ted in the rear-view mirror allows you to oper-
ate up to three different door and gate sys-
tems.
Once programmed, the integrated garage
door opener in the rear-view mirror will
assume the function of the garage door sys-
tem's remote control. Please also read the
operating instructions for the garage door
system.
When programming a garage door opener,
park the vehicle outside the garage. Do not
run the engine while programming.
The garage door opener is only available for
certain countries. Observe the legal require-
ments for each individual country.
®
The HomeLink
garage door opener is com-
patible with most European garage and gate
opener drives. More information on Home-
®
Link
and/or compatible products is availa-
ble:
at a qualified specialised workshop
R
®
via the HomeLink
R
(0) 08000 466 354 65 or alternatively
+49 (0) 6838 907-277
on the Internet at
R
http://www.homelink.com
Important safety notes
WARNING
G
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
Hotline
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
WARNING
G
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming
Programming buttons
Pay attention to the "Important safety notes"
(
page 271).
Y
Garage door remote control A is not inclu-
ded with the integrated garage door opener.
Turn the key to position 2 in the ignition
X
lock (
page 141).
Y
Select one of buttons ; to ? to control
X
the garage door drive.
To start programming mode: press and
X
hold one of buttons ; to ? of the inte-
grated garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp : begins to light up yellow.
Indicator lamp : lights up yellow immedi-
ately the first time button ;, = or ? is
programmed. If the selected button has
already been programmed, indicator
Features
271
Z
Advertisement
Table of Contents
