Table of Contents
Advertisement
Slide cover : up and remove it.
X
To fit: insert cover : again and slide down
X
until it engages.
Dipped-beam headlamps (halogen
headlamps)
Remove the cover in the front wheel arch
X
(
page 118).
Y
Turn housing cover : anti-clockwise and
X
pull it out.
Press retainer ; up.
X
Remove connector = with the bulb.
X
Pull the bulb out of connector =.
X
Insert the new bulb into connector = and
X
into bracket for retainer ;.
Ensure that the bulb is positioned correctly.
Press retainer ; down.
X
Attach housing cover : and turn it clock-
X
wise until it engages.
Replace the cover in the front wheel arch
X
(
page 118).
Y
Main-beam headlamps (halogen head-
lamps)/cornering lamps (Intelligent
Light System)
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anti-clockwise and
X
pull it out.
At the bulb holder, push the bulb upwards,
X
disconnect it and pull it out of bulb
holder ;.
Insert the new bulb into bulb holder ;,
X
push it down and secure it in place.
Attach housing cover : and turn it clock-
X
wise until it engages.
Side lamps/parking lamps (halogen
headlamps)
Due to their location, have the bulbs in the
side lamps and parking lamps changed at a
qualified specialist workshop.
Replacing bulbs
Z
119
Advertisement
Table of Contents
