Table of Contents
Advertisement
ted to the boot lid. Otherwise the vehicle
and the vario-roof could be damaged.
Features
Cup holders
Important safety notes
G
WARNING
If you do not correctly store objects in the
vehicle interior, they can slip or be flung
around, thus striking vehicle occupants.
There is a risk of injury, especially when brak-
ing or abruptly changing directions.
Always store objects so that they cannot be
R
flung around in these or in similar situa-
tions.
Always make sure that objects do not pro-
R
trude from stowage compartments, lug-
gage nets or stowage nets.
Close lockable stowage compartments
R
while driving.
Stow and secure objects that are heavy,
R
hard, pointy, sharp-edged, fragile or too
large in the boot.
! Only use the cup holders for containers of
the right size and which have lids. The
drinks could otherwise spill.
Cup holder in the centre console
To open: slide cover ; back.
X
To remove the insert: slide catch :
X
inwards on both sides in the direction of the
arrow.
Remove the cup holder insert upwards.
X
To refit the insert: place the insert in the
X
stowage compartment.
Slide catch : outwards in the direction of
X
the arrow until it engages.
You can remove the cup holder insert to clean
it. Wash it with clean, lukewarm water only.
Bottle holders
Observe the "Important safety notes" in the
"Stowage compartments" section
(
page 264).
Y
! Make sure that any bottles weighing more
than 0.5 kg that are stored in the bottle
holder rest on the vehicle floor. The bottle
holder could otherwise be damaged.
Press the outer edge of button : and slide
X
in the direction of the arrow until the bottle
fits into the opening.
Insert the bottle into the bottle holder.
X
The bottle holder is suitable for bottles with a
capacity of 0.7 l to 1.5 l.
The bottle holder does not secure bottles; it
merely prevents them from tipping over.
Features
267
Z
Advertisement
Table of Contents
