Table of Contents
Advertisement
Replacing bulbs
118
bulbs of the same type and the specified volt-
age.
Marks on the glass tube reduce the service
life of the bulbs. Do not touch the glass tube
with your bare hands. If necessary, clean the
glass tube when cold with alcohol or spirit and
rub it off with a lint-free cloth.
Protect bulbs from moisture during opera-
tion. Do not allow bulbs to come into contact
with liquids.
There are bulbs other than the xenon bulbs
that you cannot replace yourself. Replace
only the bulbs listed (
bulbs that you cannot replace yourself
replaced at a qualified specialist workshop.
If you require assistance replacing bulbs, con-
sult a qualified specialist workshop.
If the new bulb still does not light up, consult
a qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.
Overview of bulb replacement – bulbs
Halogen headlamps
Dipped-beam headlamp: H7 55 W
:
Main-beam headlamp: H7 55 W
;
Turn signal lamp: PY 21 W
=
page 118). Have the
Y
Bi-xenon headlamps (Intelligent Light System)
Cornering lamp: H7 55 W
:
Tail lamps
Reversing lamp: W 16 W
:
Replacing the front bulbs
Fitting/removing the cover in the front
wheel arch
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Advertisement
Table of Contents
