Mercedes-Benz SLK 2014 Owner's Manual page 116

Hide thumbs Also See for SLK 2014:
Table of Contents

Advertisement

Combination switch
Turn signals
Main-beam headlamps
:
Turn signal, right
;
Headlamp flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
Main-beam headlamps
To switch on the main-beam head-
X
lamps: turn the key in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the main-beam head-
lamps are only switched on when it is dark
and the engine is running.
The K indicator lamp in the instrument
cluster lights up when the main-beam head-
lamps are switched on.
To switch off the main-beam head-
X
lamps: move the combination switch back
to its normal position.
The K indicator lamp in the instrument
cluster goes out.
Headlamp flasher
To switch on: turn the key in the ignition
X
lock to position 1 or 2 or start the engine.
Pull the combination switch in the direction
X
of arrow =.
Hazard warning lamps
To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on a
turn signal using the combination switch,
only the turn signal lamp on the corre-
sponding side of the vehicle will flash.
To switch off the hazard warning lamps:
X
press button :.
The hazard warning lamps switch on auto-
matically if:
an airbag is deployed or
R
the vehicle decelerates rapidly from a
R
speed of above 70 km/h and comes to a
standstill
The hazard warning lamps switch off auto-
matically if the vehicle reaches a speed of
above 10 km/h again after a full brake appli-
cation.
i
The hazard warning lamps continue to
operate even if the ignition is switched off.
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is oper-
Exterior lighting
Z
113

Advertisement

Table of Contents
loading

Table of Contents