Table of Contents
Advertisement
Exterior lighting
112
users to see you. They can be operated
together with the side lamps or together with
the side lamps and dipped-beam headlamps.
To switch on the foglamps: turn the key
X
in the ignition lock to position 2 or start the
engine.
Turn the light switch to L or Ã.
X
Press the N button.
X
The green N indicator lamp in the instru-
ment cluster lights up.
To switch off the front foglamps: press
X
the N button.
The green N indicator lamp in the instru-
ment cluster goes out.
Only vehicles with front foglamps are equip-
ped with the "Foglamp" function; for how to
operate the foglamps on vehicles with the
Intelligent Light System (
Rear foglamp
The rear foglamp improves the visibility of
your vehicle in heavy fog for the following
traffic. Please observe the country-specific
laws on the use of rear foglamps.
To switch on the rear foglamp: turn the
X
key in the ignition lock to position 2 or start
the engine.
Turn the light switch to L or Ã.
X
Press the R button.
X
The yellow R indicator lamp in the
instrument cluster lights up.
To switch off the rear foglamp: press the
X
R button.
The yellow R indicator lamp in the
instrument cluster goes out.
Side lamps
! If the battery has been excessively dis-
charged, the side lamps or parking lamps
are automatically switched off to enable
the next engine start. Always park your
vehicle safely and sufficiently lit according
to legal standards. Avoid the continuous
use of the T side lamps for several
hours. If possible, switch on the X right
or the W left parking lamp.
page 115).
Y
To switch on: turn the light switch to T.
X
The green T indicator lamp in the instru-
ment cluster lights up.
Parking lamps
Switching on the parking lamps ensures that
the corresponding side of the vehicle is illu-
minated.
To switch on the parking lamps: the key
X
is not in the ignition lock or it is in posi-
tion 0.
Turn the light switch to W (left-hand side
X
of the vehicle) or X (right-hand side of
the vehicle).
Adjusting the headlamp range (halogen
headlamps)
The headlamp range control allows you to
adjust the cone of light from the headlamps to
suit the vehicle load.
Start the engine.
X
Turn headlamp range control : to the
X
position which corresponds to the load in
your vehicle.
0
Driver's seat or driver's seat and front-
passenger seat occupied
1
Driver's seat or driver's seat and front-
passenger seat occupied and boot
laden
2/3 Positions are not required
Advertisement
Table of Contents
