Table of Contents
Advertisement
Driving
142
the case if you are not depressing the brake
pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts immedi-
ately.
A check which periodically establishes a radio
connection between the vehicle and the key
determines whether a valid key is in the vehi-
cle. This occurs, for example, when starting
the engine.
To start the vehicle without actively using the
key:
the Start/Stop button must be inserted in
R
the ignition lock
the key must be in the vehicle
R
the vehicle must not be locked with the key
R
or KEYLESS-GO (
Do not keep the key:
with electronic devices, e.g. a mobile
R
phone or another key
with metallic objects, e.g. coins or metal
R
film
inside metallic objects, e.g. a metal case
R
This can affect the function of the key with
KEYLESS-GO.
i
The engine can be switched off while the
vehicle is in motion by pressing and holding
the Start/Stop button for three seconds.
This function operates independently of the
ECO start/stop automatic engine switch-
off function.
page 73)
Y
Key positions with KEYLESS-GO
Start/Stop button
:
Ignition lock
;
When you switch on the ignition, all of the
indicator lamps in the instrument cluster light
up. If an indicator lamp does not go out after
starting the engine or lights up while driving,
see (
page 252).
Y
If Start/Stop button : has not yet been
pressed, this corresponds to the key being
removed from the ignition.
To switch on the power supply: press
X
Start/Stop button : once.
The power supply is switched on. You can
now activate the windscreen wipers, for
example.
i
If you then open the driver's door when in
this position, the voltage supply is switched
off.
To switch on the ignition: press Start/
X
Stop button : twice.
The ignition is switched on.
i
The ignition is switched off if:
the driver's door is opened and
R
you press Start/Stop button : once
R
when in this position
Advertisement
Table of Contents
