Ethernet Lan Ports - Perle IOLAN SCG Hardware Installation Manual

Ethernet LAN Ports

There are two Ethernet combo pairs (RJ45 and SFP) identified as Ethernet 1 and 2. The two Ethernet
RJ45 ports provide the standard Ethernet interface speeds of 10/100/1000 Mbps through twisted pair
(UTP) cables of up to 100 meters (328ft) in length. The two Ethernet SFP transceiver ports support
the use of single mode, multi-mode, fiber optic and copper SFP transceiver modules. When using the
SFP transceiver ports, the speed and distance is dependent on the SFP module inserted. The IOLAN
supports SFP modules with speeds of 100Mbps or 1000Mbps. SFP modules are provided by you.
Each combo pair consists of a RJ45 port and a SFP transceiver port. Only one port in each combo pair
can be active at a time. Should both ports in a combo pair be connected, then the first port to get a link
up will take priority. Once the IOLAN has connected and the link is established, the speed LED will
turn on. This LED will indicate whether you have a 10 (copper only), 100 or 1000 Mbps link on either
of the Ethernet combo ports.
Ethernet LAN RJ45 10/100/1000
Connect LAN cables to the Ethernet 1 and/or Ethernet 2 ports on the back of the IOLAN. Cat5e
cables are recommended for 1000 Mbps connections.
Ethernet/SFP Link Status
Speed Indicator
Green
Orange
Off
SFP modules
SFP modules are inserted in the SFP transceiver slots on the back of the IOLAN. The IOLAN will
automatically detect the speed of the SFP inserted.
Inserting the SFPs
1. Align the SFP module in front of the slot to establish alignment.
2. Insert the module and push inwards with your thumb until you hear a click. Do not force the SFP
module in. SFP modules are keyed so you can only insert them one way.
Activity Indicator
Flashes with activity
Flashes with activity
N/A
IOLAN SCG Hardware Installation Guide Expandable Models
IOLAN SCG Components
Description
1000 Mbps
10 /100 Mbps
No LAN connection
11