Antenna/S; Usb-C Port; Ethernet Lan Ports; Ethernet Link Status - Perle IRG5140+ Series Hardware Installation Manual

Antenna/s

The IRG5140 has three SMA antenna connectors Main, Diversity and GNSS. For more information
on connecting the antennas see
LTE Antenna specifications see

USB-C Port

The IRG5140 USB port can increase the methods by which data can be sent and received from a con-
nected computer. The USB port can be set as a Ethernet over USB port or as a console port.
See Connecting to the USB-C port in Console Mode
net over USB Port.

Ethernet LAN Ports

Once the ports has connected and the link is established, the speed LED will turn on. The LED will
indicate whether you have a 10, 100 or 1000 Mbps link on the Ethernet port.

Ethernet Link Status

Link/Speed Indicator
Left LED Green
Both LEDs
Right LED Green
Off

GNSS Connector

GPS+GLONAS+GAILEO
Passive Antenna – SMA(M) straight connector
See Technical Specifications for electrical details.
GNSS
Connecting the
Antenna/s
Link + Flashing with activity
Link + Flashing with activity
Link + Flashing with activity
Off
IRG5140+
Perle Series Router Hardware Installation Guide
Antenna/s. For more information on recommended
and Connecting to the USB-C port as an Ether-
Description
1000 Mbps
100 Mbps
10 Mbps
No LAN connected
GNSS Connector
5