Table of Contents
Advertisement
• The back wash basin is a shampooing product designed for performing back shampooing
• Check that all accessories have been attached properly.
• Please note that the gap between the backrest and the basin when the backrest is reclined may vary slightly
from product to product.
*1 Back shampooing: the user stands behind the basin and performs shampooing from the back
(back position).
Precautions on Resin (Plated) Parts
Resin plating is adopted for part of the water stop knob,Shower head bracket and the temperature control knob.
•
Plating is a thin, hard metal film applied to the surface that may crack or peel due to corrosion or
aged deterioration.
Flaws or cracks may occur on the plated surface due to impacts from falling objects.
Flaws or cracks may occur on the plated surface when a hard object hits the surface.
Peeling of the plating may occur from flaws or cracks on the plated surface.
Caution
Example of Peeling of the
Plated Surface
Vacuum breaker
Basin
Neck cushion
Before Using This Product
Check to ensure that there are no flaws, cracks, or peeling of the plated surface of the knobs
before using the product. If peeling is observed, immediately stop using the product and
contact your closest dealer or Takara Belmont. Continued operation may result in injuries.
Name of Parts
Shower head bracket
Shower head
water control knob
Front cover
Drain cap
*1
or hair/scalp care.
Example of Flaws on the
Plated Surface
Maintenance cover
Advertisement
Table of Contents
